MDC-K120 Slab Mold Taper Measuring Instrument

MDC-K120 Slab Mold Taper Measuring Instrument





Overview

The taper of the narrow face of the mold has an important influence on the
quality of the casting billet. Excessive taper will cause the mold to
squeeze the billet shell, and a small taper will increase the air gap. With
the continuous increase of the requirements of the casting billets’ quality
and the continuous introduction of high-precision molds, the current taper
measuring instrument in the domestic market generally have low measurement
accuracy and complex measurement methods, which restrict the development of
production.

The new-generation taper measuring instrument developed by Wuhan CenterRise
M&C Engineering Co., Ltd. adopts imported high-precision inclination sensor,
combined with ultra-low power consumption processor, which can quickly and
accurately measure the actual taper value of the narrow copper plate of the
mold. The instrument is fully functional, easy to use and suitable for slab
molds of various lengths.

Most of the current slab molds are single-taper, a narrow flat copper plate.
The taper value required for production can be achieved by adjusting the
angle between the narrow copper plate and the direction of gravity. The
taper measuring instrument directly measures the angle between the narrow
copper plate and the direction of gravity. According to habits and
production needs, the angle is converted into the value of one-sided
shrinkage of the upper and lower ports.



The main features

1. Easy to calibrate, stable performance, easy to operate

2. Self-supporting, self-aligning, self-balancing

3. High measurement accuracy

4. LCD data reading

5. Fast response, real-time display reading

6. Adjustment of dynamic intelligent system

7. Lithium battery power supply, suitable for on-site use of mobile
operations

8. The continuous measurement time is more than 36 hours

9. The sensor adopts multiple protections to meet the needs of on-site harsh
environment measurement

10. The weight of the whole system is less than 3.8 kg, and it is equipped
with a set of zero-point calibration table, which is convenient for on-site
installation and measurement

11. Applicable to various arc, parabolic and straight molds



The performance and index

1. Measuring range: -3°~ +3° (measurement length can be customized
according to users’ needs)

2. Measurement accuracy: 0.01mm

3. Temperature range: -25℃~+85℃

4. Linearity deviation: -0.03mm ~ + 0.03 mm

5. The longest usage time after fully charged: > 36 hours

6. The longest storage time after fully charged: 2 months



The main components

1. Measuring instrument: central measurement and control unit, measuring
sensor

2. Measuring stand

3. Standard table: standard surface, support frame, spirit level

Minimum Order: 1 pieces