Manual Battery Pack Welding Machine , Two Electrode Li Ion Spot Welder

The MD-MPAC Manual Battery Spot Welding Machine is a general spot welding
machine based on microcomputer, suitable battery pack spot welding and assembly
in the school, university, laboratory and factory.

This machine equipped with advanced 220V AC welding power supply, and drived by
pedal, no need compressed air, easy for operation.

This type of AC spot welder utilizes the general mains supply to lower the
voltage and increase the electric current. Such kind of low voltage but large
current will be transmitted from the electrode to the linked point of two work
pieces. On the linkage, due to the resistance of work piece, high temperature
will occur so the metal will therefore generates high heat to make the work
pieces in molten condition. Thus, the purpose of welding the two work pieces is
achieved.


1. Beautiful appearance and light weight.
2. The welding spot is beautiful, the spark is small, no blackening, and the
welding current is stable, and the welding spot size is uniform.
3. It completely overcomes the phenomenon of low voltage and water leakage
after spot welding of lithium batteries. It is the ideal equipment for you to
produce assembled batteries.
4. Microcomputerization of various parameters, using LCD liquid crystal
display, key surface adjustment, accurate, intuitive and convenient.
5. The pressure of the two welding pins is adjusted independently, and the
adjustment is convenient to ensure the welding pressure is stable and reliable.

Click to Enlarge