Low Voltage Power Cable Copper Conductor Underground XLPE Cable Yjv32 Armor

Product Description
600/1000V Copper Conductor Underground XLPE Cable Steel Wire/Tape Armoured
Power Cable

Cable Selection

It is essential that the type of cable ordered is suitable for its intended
use. Cable choice will be based on a whole range of factors including
installation specifications, relevant local regulations and the performance
of appropriate cable types. It is therefore impossible to provide a
conclusive guide to cable selection and we would advise you to contact us
for our specialist advice on suitable designs to meet you specific cable
needs.

Cable structure

Conductors

Conductors shall be of Copper or Aluminium, circular standed(Non-compacted
or Compacted) or Shaped, Class 1 or Class 2 to IEC 60228, BS EN 60228. For
smaller sizes, a solid circular conductor, Class 1 as per IEC 60228, BS EN
60228 can also be supplied upon request.

Insulation

XLPE material and thickness shall be as per IEC 60502-1 or BS 5467 rated for
90° C continuous operation.

PVC material and thickness shall be as per IEC 60502-1 or BS 6346. PVC
insulation Material-PVC/A as per IEC 60502 or TI1 as per BS EN 50363.

PVC insulation as per SASO 1694 rated for 85° C continuous operation is
also available on request.

Assembly

Two, Three Four or Five insulated conductors are laid-up together with non-
hygroscopic fillers compatible with the insulation material.

Inner sheath
The assembly is bedded with an extruded layer of PVC. In case of non-
armoured cables, this layer may be omitted if the outer shape of the cable
remains practically circular.

Armour

Galvanized Steel Wires applied helically over the bedding as per IEC 60502-1
or as per BS 5467, BS 6346. (Single core cables shall be Aluminium wire
armoured)(SWA/AWA)
Double Steel Tapes applied helically over the bedding of multi-core cables
as per IEC 60502-1.(STA)

Outer Sheath

Outer sheath will be extruded PVC/ST2 as per IEC 60502-1, Type 9 as per BS
7655. Special type of PVC sheathing material such as fire retardant PVC,
anti-termite and anti-rodent PVC, ultraviolet PVC, Oil resistant PVC, etc.
Are available on request also other special sheathing materials such as
LLDPE, MDPE, HDPE, LSF, CPE etc are available.

Flame Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to
comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23
and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free
(LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other
equivalent standards.


Standard:

IEC,BS,VDE,AS/NZS,ICEA,JIS and so on,designing and manufacturing special
power cable according to the other standards required by the customer

Type and Name:

Type Designation Applications
VV Copper conductor, PVC insulated, PVC sheathed power cable For
laying indoors, in tunnel or cable trench, unable to bear external
mechanical forces
.Single core cable is not allowed to lay in a magnetic duct.
VLV Aluminum conductor, PVC insulated, PVC sheathed power cable
VY Copper conductor, PVC insulated, PE sheathed power cable
VLY Aluminum conductor, PVC insulated, PE sheathed power cable
VV22 Copper conductor, PVC insulated, steel tape armored, PVC sheathed
power cable For laying indoors, in a tunnel in cable trench, or direct
in ground,
able to bear external mechanical forces.
The single-core cable is not allowed to lay in the magnetic duct.
VLV22 Aluminum conductor, PVC insulated, steel tape armored, PVC sheathed
power cable
VV23 Copper conductor, PVC insulated, steel tape armored, PE sheathed
power cable
VLV23 Aluminum conductor, PVC insulated, steel tape armored, PE sheathed
power cable
VV32 Copper conductor, PVC insulated, steel wire armored, PVC sheathed
power cable For laying indoors, in tunnel cable trench, well or direct
in ground, able to bear
external mechanical forces and certain pulling force.
VLV32 Aluminum conductor, PVC insulated, steel wire armored, PVC sheathed
power cable
VV33 Copper conductor, PVC insulated, steel wire armored, PE sheathed
power cable
VLV33 Aluminum conductor, PVC insulated, steel wire armored, PE sheathed
power cable
Type and Name:

Type Designation Applications
YJV Copper conductor, XLPE insulated, PVC sheathed power cable For
laying indoors, in tunnel or cable trench, unable to bear external
mechanical forces
.Single core cable is not allowed to lay in a magnetic duct.
YJLV Aluminum conductor,XLPE insulated, PVC sheathed power cable
YJY Copper conductor, XLPE insulated, PE sheathed power cable
YJJLY Aluminum conductor, XLPE insulated, PE sheathed power cable
YJV22 Copper conductor,XLPE insulated, steel tape armored, PVC sheathed
power cable For laying indoors, in a tunnel in cable trench, or direct
in ground,
able to bear external mechanical forces.
The single-core cable is not allowed to lay in the magnetic duct.
YJLV22 Aluminum conductor, XLPE insulated, steel tape armored, PVC sheathed
power cable
YJV23 Copper conductor, XLPE insulated, steel tape armored, PE sheathed
power cable
YJLV23 Aluminum conductor, XLPE insulated, steel tape armored, PE sheathed
power cable
YJV32 Copper conductor, XLPE insulated, steel wire armored, PVC sheathed
power cable For laying indoors, in tunnel cable trench, well or direct
in ground, able to bear
external mechanical forces and certain pulling force.
YJLV32 Aluminum conductor, XLPE insulated, steel wire armored, PVC sheathed
power cable
YJV33 Copper conductor, XLPE insulated, steel wire armored, PE sheathed
power cable
YJLV33 Aluminum conductor, XLPE insulated, steel wire armored, PE sheathed
power cable

Click to Enlarge