Low Humidity Glove Box Semi Automated Lab Machine Honbro

Function Description



This device is designed for pipelined work process from drying box to go
through the glove box. Generally several boxes combine into a relatively
confined space. The isolation between the inside and the outside can be
achieved through gloves when operating. Low humidity wind is inlet to the
inside box through linked air inlet pipe, thus maintaining the working
environment of humidity and cleanness required by the product processing such
as electrolyte filling, standing, and pre-sealing, etc.
Technical Feature



The glove box adopts separated and modular design, which means that it can be
combined as required.
The coating and material transfer box is linked to the drying box. Stirrer
device and support are included.
The working surface is made of stainless iron 304, which is free from
corrosion.
Cylindrical transitional box is adopted to ensure the inside vacuum up to
-90Mpa.
Gas spring for two side doors make it convenient to maintain and clean the
device.
Auto electrolyte mixture system is included to remove air bubbles, and prevent
electrolyte drop when electrolyte filling.
Technical Parameters



Item Common parameter
Measures (L*W*H)2000*1600*1900mm(Transitional box and the size of PVC
pipe valve are not included.)
Weight About 1T
Power 1.0KW
Power source AC 220V±10% 50Hz/60Hz
Air source ≥0.6MPa 30L/S
Vacuum source ≥-95KPa 80L/S

Click to Enlarge