Industrial Control Line AI/AO Analog signal RS485 Protector

Industrial Control Line AI/AO Analog signal RS485 Protector
The control signal lightning protector is designed to protect the control line
system to protect the electrical and electronic equipment's signal line from
the impact of the lightning electromagnetic pulse, induced over-voltage,
transient operation, and resonance overvoltage. The interface form of the
product is crimp type, which protects 1-4 lines, and can be used in industrial
control fields with different voltage specifications of 6-48V.

Control line protector is designed for control line system to protect
electrical and electronic equipment's signal line from the impact of lightning
electromagnetic pulse, induced over voltage, transient operation and resonance
over voltage. The control line surge arrester lan can be used in RS232, LAN,
MODEM BUS, etc.

Application of SPD for Control Signal System
V.1, X.27, RS485, RS422, RS232 protector.

LAN, CAN, V.24/RS232-C, MODEM surge  protector bus.

TOKEN-RING, INDUSTRIAL BUS.

Suitable for the signal's transmission rate protection under the same voltage
and same specifications.

Analog signal lightning arrester.

Protect power supply and control line for camera.

Loss prevention system device; Security system; Security integration.

IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system.

Technical Parameters of SPD for Control Signal System

Model D05Y2(-A) D05Y4 D12Y2(-A) D12Y4 D24Y4 D36Y2(-A)
Lightning projection zone(LPZ) 2
Standards Compliance IEC61000, EN60950
According to IEC61643 III
According to DIN VDE6075 Part6(Draft 11.89) A1, A2 D
Max continuous operating voltage Uc 5V 12V 24V 36V
Nominal discharge current (8/20s) In 3K
Max discharge current Imax (8/21s) Imax 5KA
Limiting Voltage(10/700s) 20V 40V 100V 120V
Cut-off Frequency fG 20MHz
Response time tA (LN / N-PE) 1ns
Protection port 2 4 2 4 4 2
Mounting Be Installed between protected equipment and signal line
Max connecting line diameter 1.5mm2
Recommend connecting line diameter 1mm2
Transmission standards 10Mbps
Dimension Regular type: 85*25*25mm DIN rail type: 90*14*65mm
Interface form Compression plug
IP code (IEC EN 60529) IP20
Largest terminal installation torque 0.6-0.8 N.m
Material/color Aluminum/Blue
Insertion loss 5dB
Working conditions Temperature: -40 to 85 Relative humidity

Features of SPD for Control Signal System
Low insertion loss, fast response

Low limiting voltage

Precise limiting voltage

Strong discharge current

Crimping

If you want to know more about lan surge protector , please contact us.

As one of surge arrester manufacturers, we will provide more high quality
products for customers, if you have needs, please leave us a message.

Click to Enlarge