High Quality NBR Rubber Corrosion Resistance Water Pump Water Seal

　　Water pump water seal is a device that prevents coolant leakage from the
water pump, or prevents air from entering the pump. The water pump is an
essential component of the engine cooling system, as it circulates the coolant
fluid throughout the engine and the radiator, where it dissipates heat. A
faulty water pump water seal can cause serious problems for the engine, such as
overheating, corrosion, or reduced performance.

　　How does a water pump water seal work?

　　The water pump water seal consists of two main parts: a stationary part and
a rotating part. The stationary part is attached to the water pump casing,
while the rotating part is connected to the impeller shaft. The impeller is a
fan-like device that spins and pushes the coolant through the pump and the
cooling system. The water pump water seal creates a tight fit between the
stationary and rotating parts, allowing the impeller to spin freely while
preventing coolant from escaping or air from entering.

　　There are different types of water pump water seals, such as mechanical
seals, packing seals, or lip seals. Mechanical seals use spring-loaded metal
rings that press against each other with a thin film of coolant in between.
Packing seals use braided rope-like materials that are compressed around the
shaft and lubricated by the coolant. Lip seals use rubber or plastic rings that
fit snugly around the shaft and create a barrier with their flexible lips.

　　How to maintain and repair a water pump water seal?

　　A water pump water seal can wear out over time due to friction, corrosion,
or contamination. Some signs of a bad water pump water seal are:

　　1. Coolant leakage around the water pump or under the car.

　　2. Engine overheating or poor cooling performance.

　　3. Noise or vibration from the water pump.

　　4. Reduced fuel efficiency or power output.

　　To prevent these problems, it is important to check and replace the water
pump water seal regularly, according to the manufacturer’s recommendations.
Some factors that can affect the lifespan of a water pump water seal are:

　　1. The quality and compatibility of the coolant fluid.

　　2. The operating temperature and pressure of the engine.

　　3. The rotation speed and alignment of the impeller shaft.

　　4. The cleanliness and filtration of the coolant system.

　　To repair a water pump water seal, one has to remove the water pump from
the engine, disassemble it, and replace the old seal with a new one. This can
be a complex and time-consuming process that requires special tools and skills.
Alternatively, one can use a sealant product that can fix most leaks in the
water pump casing and seals. This is a simpler and cheaper option that can work
effectively in some cases.

　　Water pump water seal is a vital part of the engine cooling system that
prevents coolant leakage and air ingress. A faulty water pump water seal can
cause serious damage to the engine and reduce its performance. Therefore, it is
essential to maintain and repair a water pump water seal properly and timely.

Minimum Order: 100 pieces

Click to Enlarge