Heavy Copper PCB

Thick copper pcb and heavy copper pcb, pcb fabrication up to 12oz, large
current, pcb fabrication base material is FR4/Teflon/Ceramic, pcb fabrication
used in high-power power supply and motor circuits products. HUIHE CIRCUITS
Heavy Copper PCB has passed ISO9001 / ISO13485 /IATF16949 / UL /RoHS / REACH
certification.

Heavy Copper PCB List

2 Layer ENIG Heavy Copper PCB Manufacturers

4 Layer ENIG Heavy Copper PCB

6 Layer ENIG Heavy Copper PCB supplier

6 Layer ENIG Heavy Copper PCB manufacturing

6 Layer ENIG Heavy Copper PCB Fabrication Service

6 Layer ENIG Heavy Copper PCB

8 Layer ENIG Heavy Copper PCB

8 Layer ENIG Impedance Control Heavy Copper PCB

2 Layer ENIG Heavy Copper PCB

The Copper Plating Process Must Achieve The Following Aspects:
1. Add a certain value according to the area value calculated by the computer
and the empirical constant accumulated in the actual production to ensure the
integrity of the plating layer in the hole.
2. When the circuit board is electroplated for 5 minutes, take out the
substrate and observe whether the copper layer on the surface and the inner
wall of the hole is intact. It is better that all the holes have a metallic
luster.
3. A certain distance must be maintained between the substrate and the
substrate.
4. When the thick copper plating reaches the required electroplating time, a
certain amount of current must be maintained during the removal of the
substrate to ensure that the surface of the substrate and the hole will not be
blackened or darkened.
5. According to the mechanical processing floppy disk for trial processing, the
first part pre-inspection is carried out, and all the workpieces are processed
after meeting the technological requirements.
Thick Copper Plate Quality Control
1. Strictly implement the first article inspection system to ensure that the
product size meets the design requirements.
2. According to the raw materials of the circuit board, reasonably select the
milling process parameters.
3. When fixing the position of the circuit board, carefully clamp it so as not
to damage the solder layer and solder mask on the surface of the circuit board.
4. To ensure the consistency of the substrate dimensions, the position accuracy
must be strictly controlled.
5. When disassembling and assembling, pay special attention to the barrier
layer of the substrate and pad paper to avoid damage to the coating layer on
the surface of the pcb circuit board.

As a Chinese pcb manufacturer, we have different types of products for sale, if
you have needs, please contact us.

Minimum Order: 1 sets

Click to Enlarge