HEAT TRANSFER VINYL FOR SCREEN PRINTING AND DIGITAL PRINTING

Heat transfer vinyl(HTV) is the polyurethane（PU) or polyvinyl chloride(PVC)
material also can be called T-shirt transfer vinyl. These have standard block
colors and for the printable HTV often requires a solvent or eco-solvent ink to
print a full-color design on the vinyl. As a heat transfer vinyl manufacturers,
we have a professional process. Firstly to create a design, cut it by plotter,
weed and peel off the excess vinyl, then heat press on to fabrics, sportswear,
t-shirts, hats, shoes or other textiles.

Heat Transfer Vinyl Uses

Open the cutting software and horizontal mirror the design.

Move the image into the cutting area and adjust the setting to heat transfer
vinyl.

Select either 'smooth' or 'flocked' according to your vinyl thickness.

Load the heat transfer vinyl on the cut machines with the transparent plastic
backing side down and begin to cut.

Use a pin to weeding the waste vinyl from the cut design.

Turn over the vinyl to keep the transparent plastic backing side above and
place the image side on your fabric.

Heat press or iron on the heat transfer vinyl for around 30 seconds with a
temperature of 150 degrees. The pressing time and temperature adjust by your
fabric need.

Waiting for the cool then peel off the transparent plastic.

If the vinyl also peels off from the fabric, then you need to do one more time
heat press or iron until the vinyl is fixed well on the fabric.

How To Apply Heat Transfer Vinyl With Iron?

Turn off the steam function and select the cotton setting.

Using the iron on the smooth firm table.

Iron t-shirt to remove moisture and wrinkles.

Keep the design carrier sheet side up and cover it with a layer of proof paper.

Iron on the heat transfer vinyl(HTV) with recommended time and temperature.

Press from one side area to another side area step by step.

Finding the press time and pressure is very important because if too long you
may melt the adhesive and if you don't press for long enough or firmly enough,
it may come off.

Peel off the carrier sheet by hot peel, warm peel, or cold peel.

How To Cut Heat Transfer Vinyl

1. Open the cutting software and horizontal mirror the design.

2. Move the image into the cutting area and adjust the setting to heat transfer
vinyl

3. Select either 'smooth' or 'flocked' according to your vinyl thickness

4. Load the bulk heat transfer vinyl on the cut machines with the transparent
plastic backing side down and begin to cut.

5. Use a pin to weeding the waste vinyl from the cut design.

6. Turn over the vinyl to keep the transparent plastic backing side above and
place the image side on your fabric.

7. Heat press or iron on the heat transfer vinyl for around 30 seconds with a
temperature of 150 degrees. The pressing time and temperature adjust by your
fabric need.

8. Waiting to cool then peel off the transparent plastic.

9. If the vinyl also peels off from the fabric, then you need to do one more
time heat press or iron until the vinyl is fixed well on the fabric.

There are many heat transfer wholesale suppliers, but we are one of the best
choices for you.

If you need any kinds of heat transfer film, please contact us, as one of the
most professional heat transfer film manufacturers, Qiantai is willing to offer
you high quality products.

Click to Enlarge