EPDM Rubber Sheet, EPDM Sheeting, EPDM Rolls

EPDM Rubber Sheet, EPDM Sheeting, EPDM Rolls


Description: the EPDM rubber sheet, EPDM rubber roll are made by drum
vulcanizer(ROTOCURE) or plate vulcanizer with high quality Ethylene-Propylene-
Diene Monomer Rubber. The EPDM(Ethylene Propylene Diene monomer) rubber is a
synthetic rubber, this elastomer is widely use in most of the outdoor
application and for chemical and high temperature resistant application. EPDM
rubber also exhibits outstanding resistance to ozone, steam, and also an
electrical insulator. EPDM rubber is widely use as roofing membranes, since it
does not pollute the run off rain water, this EPDM rubber sheet is also use in
rainwater harvesting. EPDM rubber sheets are also use as geomembranes, rubber
mechanical goods, impact modification, seals for solar panel, hose vibrators
and pond liners. EPDM rubber sheet is resistant to aging, water, abrasion, UV
and ozone, which makes it perfect material to use under exposed environment.
They are highly recommended at areas where surface is exposed to weather,
sunlight, heat, ozone or gasses. EPDM rubber sheet is also ideal for use in
water and is often considered the material of choice for potable water
applications. 0.5-10mm thickness made by drum vulcanizer(ROTOCURE) with shiny
surface, 12-100mm thickness made by plate vulcanizer for higher thickness under
middling hardness and high tensile strength, excellent performance of aging
resistance, acid and alkali resistant, high temperature resistant, low
temperature resistant, ozone-resistant, working in the liquid which contains
50% acid or alkali at the temperature of -40°C - +130°C(maximum 150°C
momentary). Apply to punch all kinds of seals, gaskets or window seals,
automobile beading, rubber beading, pads & profiles, man-way gaskets, low
pressure pipe seals, weather strips.



Specifications:

mate , rial: virgin EPDM or EPDM/SBR

quality: industrial grade, food grade, commercial grade

color: black, white, red, grey etc.

surface: smooth/smooth, smooth/impression fabric, double impression fabric

Insertion: reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire
mesh SS201, SS304, SS316

tensile strength: 4-14Mpa

hardness: 40, 50, 60, 70, 80+/-5shore A

elongation: 250%-380%

density: 1.20-1.40g/cm3

working temperature: -40°C - +130°C

thickness: 0.5-100.0mm

width: 0.1-3.6m

length: 0.1-20m

OEM & customized size are agreed

packing in rolls and pallets

***when you enquiry, pls confirm the tensile strength, hardness, color, size
and quantity***

Minimum Order: 1 pieces

Click to Enlarge