electrode paste

We are China Xuzhou carbon co, ltd. Now we introduce you with our electrode paste.
Electrode paste is used in closed electric smelting furnace as continuous self-
baking electrode to produce calcium carbide, ferroalloy and so on. During the
furnace operation, electrode paste acts as current conductor.
Our electrode paste has following characteristics:
1. Lower ash content;
2. Acurate dosing and stable volatile content;
3. Good electric and thermal conductivity and the sintering speed apropriate to
that of consumption of working end;
4. Smelting at lower temperature with certain fluidity and homogeneous
composition;
5. High resistance to high temperature, oxidation and thermal shock, low
electric resistance and high mechanical strength after sintering;
The properties of electrode paste are as follows:
Ash <5%
Volatile material 12-14%
Compressive strength> 18Mpa
Electric resistivity <70micro ohm m
Bulk density > 1.38g/cm3
size :100*90*60mm
We can offer electrode paste as your special properties demand.
Our electrode paste export to Latin America, Mid-East, South-East Asia, etc.

Minimum Order: 20 tons

Click to Enlarge