Cooling Tower Spray Nozzle

As an industrial cooling towers LLC, AUVC can provide different types of
cooling tower parts. Using high-quality raw material which is the same as
liangchi, marley, bac, kuken, kingsun.

The cooling tower nozzle is the component of water distribution in the cooling
tower, which is made of ABS by one-time injection molding. Socket connection,
firm connection, easy disassembly, not easy to block, nozzle water distribution
is uniform, using cross water distribution method, hot water evenly distributed
to the top of packing, can achieve full heat dissipation effect, can be widely
used in circular and square counter flow tower.

As a professional cooling tower spray nozzle manufacturer, we offer different
types of cooling tower water distribution nozzles. You can choose what you need
from the following products.

Advantage of Cooling Tower Spray Nozzle
High strength, light weight, low water pressure, low spray height, uniform
water distribution, good splash effect, convenient installation and
maintenance, adjustable water volume, good heat dissipation effect, especially
suitable for cooling water. Even water distribution, low working pressure
(nozzle outlet working pressure is only 0.6mH2O), large pressure range, not
easy to block. Because of its special designed locking and anti loosing device,
it can be firmly connected with the water distribution pipe without falling
off, which can ensure the long-term safe operation of the water distribution
system. Under normal use conditions, the service life of the nozzle is 20
years.

Working Principle of Cooling Tower Nozzle
When the hot water flows through the cooling tower water spray nozzles, the
swirling flow is generated under the action of the swirling plate in the
nozzle, and the hot water is sprayed upward, and after the heat exchange with
the air, the cold water falls into the pool, and the hot air is discharged into
the atmosphere by the tower top duct after water removal by the water
collector. It rotates in the cavity and rotates downward to eject from the
lower nozzle. After the water is ejected, it forms an umbrella shaped rotating
water body, impacts the splash strip and splash blade, and splashes into evenly
distributed mist like small water droplets, falling to the top surface of the
filler.

Minimum Order: 1 dozens

Click to Enlarge