COBAN HOT SELLING GPS-303F 303G TRACKER

1. Specifications 3
2. Hardware Description 3
3. Terminal Installation 4
4. Device Status Light 5
5. Mobile APP 5
6. BAANOOL IOT’s Web Version 6
7. GPRS configuration for live real-time tracking 7
7.1 APN Setting 7
7.2 Configure user name and password of GPRS 7
7.3 Configure domain name and port 8
7.4 GPRS mode 8
8. Function Details 8
8.1 Changing Password 8
8.2 Authorization 9
8.3 Single Tracking 9
8.4 Sleep tracking strategy 10
8.5 Smart angle updating 11
8.6 Location based service (LBS) / Cell-ID tracking 11
8.7 Listen 11
8.8 Forwarding incoming SMS messages 11
8.9 SIM Card Balance Enquiry 12
8.10 ACC ON/OFF Alert 12
8.11 Remote immobilizing 13
8.12 Fuel sensor calibrating 13
8.13 Configure times of alarm 13
8.14 Alarms 14
8.15 Remote controller（For B/D model） 16
8.16 Arming 16
8.17 Silent Arming 16
8.18 Disarming 17
8.19 Alarm function in arming state 17
8.20 WiFi hotspot (For C/D model) 18
8.21 Check WiFi hotspots (For C/D model) 18
8.22 Modify WiFi hotspot password (For C/D model) 18
8.23 WiFi camera (For C/D model) 18
8.24 Check Status 19
8.25 Check IMEI 19
8.26 Local time setting 19
8.27 Reset Hardware 20
8.28 Activate Fuel value in GPRS 20
8.29 TCP / UDP switch 20
8.30 SMS mode 20
8.31 Configure SMS monitoring center number 21
8.32 Configure GPRS heartbeat package interval 21
8.33 Initialization 21
9. Package contents 22
10. Cautions 22
11. Troubleshooting 23











,




















1. Specifications
Product name LTE wireless data terminal
Model 405
DIM. 9.6×5.4×1.9cm
Weight 70g
Network GSM/GPRS/WCDMA/LTE
Band 4G (B1/B2/B3/B4/B5/B7/B8/B28A/B28B/B40)
3G (B1/B2/B3/B5/B8)
2G (850/900/1800/1900Mhz)
GPS sensitivity -165dBm
GPS accuracy 5m
Time To First Fix Cold status 45s
Warm status 35s
Hot status 1s
Applicable car power 12V-24V
Battery Chargeable 3.7V 90mAh Li-ion battery
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +65°C
Humidity 5%--95% non-condensing
2. Hardware Description




3. Terminal Installation
1.Please ask a qualified engineer to install it.
2.The installation environment should ensure that the GSM and GPS signals
are good
3.Please do not install it in a dusty and humid environment.
4.Find the 14PIN wiring harness provided with the product, insert it into
the corresponding wiring hole of the product, and connect to the original
car circuit as shown in the following Wiring Diagram:

5.The pink wire can be connected to the original car alarm horn or the
alarm horn purchased together.
6.Understand that the vehicle door trigger type is positive trigger or
negative trigger. Connected to the green wire if it is positive trigger,
and connected to the blue wire if it is negative trigger.
7.Please install the SOS button where the driver can touch it.
8.SIM card installation
Open sealed buckle of sim card, insert the simcard , then ,Put sealed
buckle back.
Please be sure to confirm that the SIM card network frequency band is the
network frequency band supported by the device. Caller ID must be turned on
and the PIN code must be turned off. The call forwarding function cannot be
turned on.

Minimum Order: 1 pairs