Closed Loop Spray Dryer Machine Inert Gas Atomization Dryer For Nitrogen Pr

PRODUCT DESCRIPTION


Nitrogen closed loop spray dryer Inert gas atomization dryer





Description:



First of all, filling the nitrogen to be heated into the tower, the liquid
materials to be dried are transported to the centrifugal atomizer, then they are
rotatied in a high speed, and fially, they become the fine droplets, droplets in
the drying tower fully heat exchange with nitrogen.

The liquid parts have been instant evoperated, the solid parts become powder
materials down to the bottom of the drying tower, and the last, the dried powder
discharge from the bottom of the tower.

Among them, evoparated organic solvent through the cyclone seperator, bag dedustor
to remover the powder in the role of the blower, and then by the condenser, the
dust removered saturated organic solvent gas into liquid discharge from the
condenser.

In case the liquid be carried out, there has addied a gas-liquid separator. Among
them, as a drying medium for the inert gas being heated as a dry carrier in the
system used to re-cycle.

Explosion-proof closed cycle centrifugal spray drying system is working in a
confined environment, drying medium is inert gas (like nitrogen), positive pressure
operation in the drying tower.

If the internal pressure decreased, the pressure transmitter can control the
nitrogen amout entered into the drying tower automatically, to ensure system
pressure balance.medium like nitrogen has a affact of bearying moisture, demoval
moisture and cycle -transmission, the media can be used cycled.



Closed Loop Spray Dryer Machine Inert Gas Atomization Dryer For Nitrogen Processing
0



Application:


Chemical industry: Sodium fluoride (potassium), basic dyes and pigments, dye
intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric
acid agents, amino acids, white carbon black, etc.


Plastic resin: AB, ABS emulsion, urea-formaldehyde resin, phenolic resin, dense
rubber (urea) formaldehyde resin, polyethylene, polyvinyl chloride, etc.


Food industry: Rich fat milk powder, grain, cocoa milk powder, milk substitute
powder, egg white (yellow).


Food and plant juice: Oats, chicken juice, coffee, instant tea, spices, meat,
protein, soybean, peanut protein, hydrolysate, etc.
carbohydrate: Corn syrup, corn starch, glucose, pectin, maltose, etc. ceramics:
Alumina, ceramic tile materials, magnesium oxide, talcum powder.



Closed Loop Spray Dryer Machine Inert Gas Atomization Dryer For Nitrogen Processing
1




Technical parameters

Specifications XLP-5 XLP-10 XLP-25 XLP-50 XLP-100 XLP-150
Inlet air temperature 90-140°C,adjustable
Exhaust air temperature 60-80°C, depending on the product to be dried, and
URS
Nominal water evap.capacity(Kg / h) 5 10 25 50 100 150
Heating method Steam
Drying tower diameter (mm) 1300 1500 2000 2500 3200 3600
Overall dimensions (m) According to the configuration and URS
Product yield 99-99.99%,varies with the product features and configuration
Widely used in the pharmaceutical, chemical industry, foodstuff, spray dry powder
process.ect.





Product Features
Uniform quality
Complete control of moisture content, particle structure, particle size
distribution, solubility, and wettability, and retention of natural aromas and
flavors.


Unbeatable performance /cost ratio
Energy efficient components, continuous and rapid drying, ease of operation and
process automation provide complete control over yield and costs.


Versatility
Customized plant design based on many years of experience in a wide range of
applications is your assurance of complete compliance with individual requirements.


Long service life
Top-quality, reliable components, efficient and straightforward CIP and expert
engineering increase service life and availability for maximum performance.


Traceability
Automated process control enables end-to-end traceability in compliance with
current food standards and regulations.



Our Campany
Company introduction:

Changzhou Melton Trading Co., Ltd was established in 2008. Our company is located
in the birthplace of China's drying equipment industry - Zhenglu Industrial Park,
Changzhou City, Jiangsu Province. It is a modern enterprise engaged in the R&D,
production and sales of various drying equipment, sludge dryers, vacuum dryers,
granulators, pulverizers, mixers, screening and dust removal and other equipment.
In recent years, we have continuously increased investment in technical
transformation, and manufactured a variety of low-energy, low-emission dryers to
meet customers' environmental protection production needs.



All kinds of drying equipment produced by our company are widely used in
pharmaceutical, chemical, food, agricultural and sideline product processing,
textile, electronics, light industrial products, fertilizer, feed and other fields.
The products are all over the country and exported to Southeast Asia, Europe,
America and other countries.

The company adheres to the entrepreneurial philosophy of "technical innovation,
quality-oriented", promotes the work style of "simple and rigorous, strives for
perfection", advocates "enterprise integrity, considerate service", regards product
quality as life, and respects customers from all over the world as friends.

We warmly welcome people from all walks of life to come to cooperate, negotiate and
seek common development!

Click to Enlarge