Business Opportunities

Product Introduction The equipment is based on the original driver's side power seat, and fully demonstrates the composition and working process of the car power seat with memory function. It is suitable for the teaching needs of middle and higher vocational and technical colleges, general education colleges and training institutions for the theory and maintenance training of automobile power seats. Second, functional characteristics 1. Real operable car driver's side power seat, fully display the composition of car power seat. Operate the power seat switch, which can adjust the front and rear movement, tilt adjustment, front and rear vertical adjustment of the power seat, etc.; The memory switch is operated to store driving position information, which can be restored to the set seat position after others change the seat posture. A realistic demonstration of how a car power seat with memory function works. 2. The teach-in board panel adopts 4mm thick high-grade aluminum-plastic panel with corrosion resistance, impact resistance, pollution resistance, fire prevention and moisture resistance, and the surface is sprayed with primer treatment by special process; UV flatbed inkjet panel printed with color circuit diagram that never fades; Students can visually compare circuit diagrams and physical objects to understand and analyze the working principle of car power seats. 3. The test terminal is installed on the panel of the teaching pendant, which can directly detect the electrical signals of each circuit component of the power seat, such as resistance, voltage, current, frequency signal, etc. on the panel. 4. The panel part of the teaching board adopts 1.5mm cold plate stamping forming structure, which has beautiful appearance; the bottom frame part adopts steel structure welding, and the surface adopts spraying process with self- locking caster device. 5. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage transformation rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti-short circuit function.

Product Introduction The equipment adopts the physical basis of the automobile exterior lighting system, and fully displays the composition and working process of the automotive exterior lighting system. It is suitable for the teaching needs of the school for the theory and maintenance of automobile lighting system. Second, functional characteristics 1. Real and operable car exterior lighting system, fully display the composition of the car exterior lighting system. The operation of various light switches can realistically demonstrate the working process of the exterior lighting system of the car. 2. The teach-in board panel adopts high-grade aluminum-plastic panel that is resistant to impact, pollution, fire and moisture, and the surface is treated by special process spraying primer; School students can visually compare circuit diagrams and physical objects to understand and analyze the working principle of automobile lighting systems. 3. The detection terminal is installed on the panel of the teaching pendant, which can directly detect the electrical signals of each circuit component of the exterior lighting system of the car, such as resistance, voltage, current, frequency signal, etc. 4. The panel part of the teaching board adopts 1.5mm cold plate stamping forming structure, which has a beautiful appearance; the bottom frame part adopts steel structure welding, the surface adopts spraying process treatment, with self-locking caster device, and the base of the teaching board is equipped with a desktop of about 40cm, which is convenient for placing data, light testing instruments, etc. 5. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage transformation rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti-short circuit function.

Product Introduction The equipment adopts six typical (namely: contact ignition system, Hall electronic ignition system, magnetic induction ignition system and distributorless group ignition system, photoelectric ignition system) of the real parts of the engine ignition system, fully demonstrating the composition and working process of the engine ignition system. It is suitable for dynamic teaching demonstrations and fault diagnosis and troubleshooting needs of middle and higher vocational schools and training institutions on the structure and working principle of engine ignition system. Second, functional characteristics 1. Six typical engine ignition systems that can be operated can fully display the composition and working process of contact ignition system, Hall electronic ignition system, magnetic induction ignition system and distributorless group ignition system, photoelectric ignition system. 2. The teach-in board panel adopts 4mm thick high-grade aluminum-plastic panel with corrosion resistance, impact resistance, pollution resistance, fire prevention and moisture resistance, and the surface is sprayed with primer treatment by special process; The panel is printed with a color circuit diagram and working principle diagram that will never fade; Students can visually compare circuit diagrams and physical objects to understand and analyze the working principle of various ignition systems. 3. The detection terminal is installed on the panel of the teaching pendant, which can directly detect the electrical signals of each circuit component of the ignition system, such as resistance, voltage, current, frequency signal, etc. on the panel. 4. The teaching board panel is equipped with a diagnostic seat, which can be connected to a special or general automotive decoder to read the fault code and clear the fault code and other self-diagnosis functions of the engine electronic control system. 5. The panel part of the teaching board adopts 1.5mm cold plate stamping forming structure, which has beautiful appearance; the bottom frame part adopts steel structure welding, the surface adopts spraying process, with self-locking caster device, and the base of the teaching board is equipped with a desktop of about 40cm, which is convenient for placing data and light testing instruments. 6. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage transformation rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti-short circuit function.

Product Introduction The equipment adopts the automotive ABS/ASR/ESP braking system as the basis, and is equipped with the working principle diagram of the ABS/ASR/ESP system, which truly shows the working process of the ABS/ASR/ESP system during emergency braking. It can meet the teaching functions such as the structural composition and action demonstration of the ABS/ASR/ESP braking system. It is suitable for the theoretical teaching of automotive ABS/ASR/ESP braking system and the teaching needs of inspection and maintenance training. Second, functional characteristics 1. Based on the real car ABS/ASR/ESP braking system, the composition of the ABS/ASR/ESP braking system is fully displayed. 2. The three-phase asynchronous motor drives the front and rear axles to rotate to simulate the driving of the car. When the brake pedal is urgently pressed, the ABS/ASR/ESP system starts to work, the front and rear brake discs keep a slight rotation, and the brake pedal can feel the continuous bounce, which truly demonstrates the working process of the ABS/ASR/ESP system of the car. 3. The panel of the training bench is painted with color UV flat panel spray circuit diagram and hydraulic pipeline diagram, and students can intuitively compare the circuit diagram and the actual object of ABS/ASR/ESP brake system, and understand and analyze the working principle of the control system. 4. The panel of the training bench is equipped with a detection terminal, which can directly detect the electrical signals of the pins of each sensor and control unit, such as resistance, voltage, current, frequency signal, etc. on the panel. 5. The training bench is equipped with a pressure gauge, which can display the hydraulic changes of the brake master cylinder and four brake sub-pumps in real time. 6. The panel of the training bench is equipped with fault indicator light and diagnostic base, which can be connected to a special or general automotive decoder to perform ECU code query, read fault code, clear fault code, read data flow, perform component testing, parameter setting, waveform analysis and other self-diagnosis functions of the ABS electronic control system. 7. Equipment panel cabinet: 1.5mm cold plate stamping and forming, maintenance door set on the back; the base is welded by steel structure, the surface is treated by spraying process, with self-locking caster device, flexible movement, safe and reliable, strong and durable. 8. The clutch is used to connect the brake disc and the motor output shaft, which can realize the brake differential of each wheel, and the brake pedal keeps rebounding when braking. (Optional)

Product Introduction The equipment adopts the automobile front axle assembly as the basis, and comprehensively displays the composition and working process of the power steering system and the front axle suspension system. It is suitable for the teaching needs of automobile power steering, front axle suspension theory and maintenance training in middle and higher vocational schools and training institutions, and fully meets the teaching functions of automobile front axle system structure display, work simulation, disassembly and assembly training. Second, functional characteristics 1. Real operable automotive steering system and front axle suspension components, fully demonstrating the composition structure of power steering and independent suspension. 2. The three-phase motor does the power source to drive the power pump to work, manipulate the steering wheel, and truly demonstrate the working process of the car power steering. 3. The training bench is equipped with a pressure gauge, which displays the parameter changes of the power supply pressure during steering in real time. 4. The bottom of the wheel is equipped with a corner disc, which can display the steering angle of each wheel separately. 5. The base of the training bench adopts steel structure welding, the surface adopts spraying process, with self-locking caster device, flexible movement, safe and reliable, strong and durable.

Product Introduction The equipment adopts ABS brake system to fully display the composition and working process of ABS brake system. It is suitable for the teaching needs of ABS brake system theory and maintenance training in schools. Second, functional characteristics 1. Real operable ABS brake system, fully demonstrate the composition and working process of ABS brake system. Operation and control of various switches, can demonstrate the working process of the ABS brake electronic control system (solenoid valve working conditions, etc.). 2. The teach-in board panel adopts high-grade aluminum-plastic panel that is resistant to impact, pollution, fire and moisture, and the surface is treated by special process spraying primer; The panel is printed with a color circuit diagram and working principle diagram that will never fade; Students can intuitively compare the circuit diagram and the real thing, and understand and analyze the working principle of the electronic control system of the dynamic transmission. 3. The detection terminal is installed on the panel of the teaching board, which can directly detect the electrical signals of the circuit components of the ABS brake system, such as resistance, voltage, current, frequency signals, etc. on the panel. 4. The equipment is equipped with a diagnostic base, which can be connected to a special or general-purpose automotive decoder to read fault codes, clear fault codes, read data streams and other self-diagnosis functions of the ABS brake system. 5. The equipment panel part adopts 1.5mm cold plate stamping forming structure, beautiful appearance; the bottom frame part adopts steel structure welding, the surface adopts spray process, with self-locking caster device, and the base of the teaching board is equipped with a desktop of about 40cm, which is convenient for placing data, testing instruments, etc. 6. The equipment works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit transformer rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti- short circuit function.

Functional features 1. The real operable electronically controlled diesel engine (acceleration/deceleration/idle working conditions are normal), fully demonstrating the composition and working process of the electronically controlled diesel engine. 2. The training bench panel adopts 4mm thick high-grade aluminum-plastic panel with corrosion resistance, impact resistance, pollution resistance, fire prevention and moisture resistance, and the surface is treated by special process spraying primer; The panel is printed with a color circuit diagram that does not fade; Students can visually compare the circuit diagram and the electronically controlled diesel engine to understand and analyze the working principle of the control system. 3. The panel of the training bench is equipped with a detection terminal, which can directly detect the electrical signals of each sensor, actuator and engine control unit pin, such as resistance, voltage, current, frequency signal, etc. on the panel. 4. The panel of the training bench is equipped with a car instrument, which can display the engine speed, water temperature, oil pressure lamp, charging indicator, electronic control system fault indicator and other parameter changes in real time. 5. The training bench is equipped with a diagnostic seat, which can be connected to a special or general-purpose code generator to read fault codes, clear fault codes, read data streams and other self-diagnosis functions of the engine electronic control system. 6. The training station is equipped with throttle control device, which can facilitate the acceleration and deceleration of the engine. 7. The training platform is equipped with power switch, water tank protective cover, flywheel protective cover and other installation protection devices. 8. The base in front of the equipment testing panel is equipped with a 20cm steel table, which is convenient for placing data, testing instruments, etc. 9. The base of the training platform adopts steel structure welding, the surface adopts spraying process, and the front / both sides are welded round handguard rods, with self-locking caster device, flexible movement, safe and reliable, strong and durable.

Functional features 1. The automatic transmission assembly (complete accessories) is used for dissection, and the parts are complete, which can comprehensively display the internal structure of the transmission and the whole process of shifting power transmission. 2. Through ingenious dissection and different colors of each section, the mechanical structure inside the transmission and the assembly relationship between each other are clearly visible. 3. The flip frame adopts high-strength steel structure welding, and the surface is treated by spraying process. The cold plate stamped cabinet bottom with self-locking castors is mobile for easy teaching.

Functional features 1. Install the real automobile chassis systems (including front and rear suspension system, steering system, transmission train, manual transmission and gear mechanism, brake system), and fully display the composition of each system of the automobile chassis. 2. It can truly display and disassemble the various systems of the automobile chassis. 3. The dissected manual transmission can be dynamically demonstrated and detected, the geared motor input power, the transmission can be carried out for shifting operation and dynamic test, and the four wheels can be demonstrated by slow driving in contact with the ground. 4. Motor drives directional booster pump, real demonstration of power steering working process. 5. The base of the training bench adopts steel structure welding, the surface adopts spraying process, with self-locking caster device, flexible movement, safe and reliable, strong and durable.

Functional features 1. Real and operable vehicle electrical system, fully display the composition of the vehicle electrical system. Turn on the power supply, operate various electrical switches and buttons on the teach board, and truly demonstrate the working process of various systems of automotive electrical appliances such as automobile engine electronic control system, instrument system, lighting system, wiper system, horn system, ignition system, power window system, electric door lock, audio system, starting system and charging system. 2. The equipment panel adopts high-grade aluminum-plastic panel with resistance to impact, pollution, fire and moisture, and the surface is treated by special process spraying primer; The panel is printed with a color circuit diagram that never fades; Students can intuitively compare circuit diagrams and physical objects to understand and analyze the working principle of each system of automobile electrical appliances. 3. The detection terminal is installed on the panel of the teaching board, which can directly detect the electrical signals of the circuit components of each system of the automobile electrical appliance on the panel, such as resistance, voltage, current, frequency signal, etc. 4. The equipment panel is equipped with a diagnostic seat, which can be connected to a special or general-purpose automotive decoder to perform ECU code query, read fault code, clear fault code, read data flow, perform component testing, parameter setting, waveform analysis, key matching and other self-diagnosis functions for engine control unit, instrument cluster, comfort system unit, etc. 5. The panel part of the equipment adopts the panel part of the 1.5mm cold plate stamping forming structure, which has a beautiful appearance; the bottom frame part adopts steel structure welding, and the surface adopts spraying process with self-locking caster device.

Functional features 1. Anatomical treatment of each key part of cooling (such as: water pump, thermostat, etc.), spraying different colors on each profile, and comprehensively displaying the internal and external structure of the engine cooling system. 2. The teach-in board panel adopts high-grade aluminum-plastic panel that is resistant to impact, pollution, fire and moisture, and the surface is treated by special process spraying primer; The panel is printed with a color circuit diagram and working principle diagram that will never fade; Students can intuitively compare the structural schematic diagram and physical object of the engine cooling system to understand and analyze the working principle of the engine cooling system. 3. LED lights of different colors are installed on the panel of the teaching board, and the flow direction of coolant in the large, small and mixed cycles can be dynamically demonstrated through the sequential flashing of LED lights. The teach-in board panel is equipped with a detection terminal, which can directly detect the electrical signals of each circuit element of the cooling fan system, such as resistance, voltage, current, frequency signal, etc. on the panel. 4. The panel part of the teaching board adopts 1.5mm cold plate stamping forming structure, which has beautiful appearance; the bottom frame part adopts steel structure welding, the surface adopts spraying process, with self-locking caster device, and the base of the teaching board is equipped with a desktop of about 40cm, which is convenient for placing data, testing instruments, etc. 5. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage transformation rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti-short circuit function.

The lubrication system is dissected, and each profile is painted with different colors to fully display the internal and external structure of the engine lubrication system. 2. The teach-in board panel adopts high-grade aluminum-plastic panel that is resistant to impact, pollution, fire and moisture, and the surface is treated by special process spraying primer; The panel is printed with a color circuit diagram and working principle diagram that will never fade; Students can intuitively compare the structural schematic diagram and physical object of the engine lubrication system to understand and analyze the working principle of the engine lubrication system. 3. LED lights of different colors are installed on the panel of the teach board, and the flow direction of lubricating oil in the engine oil circuit can be dynamically demonstrated by the sequential flashing of LED lights. 4. The teach-in board panel is equipped with a detection terminal, which can directly detect the electrical signals of each circuit component of the sliding system, such as resistance, voltage, current, frequency signal, etc. on the panel. 5. The panel part of the teaching board adopts 1.5mm cold plate stamping forming structure, which has a beautiful appearance; the bottom frame part adopts steel structure welding, the surface adopts spraying process, with self- locking caster device, and the base of the teaching board is equipped with a desktop of about 40cm, which is convenient for placing data, light testing instruments, etc. 6. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage transformation rectification, without battery, reducing the trouble of charging, and 12V DC power supply has anti-short circuit function.

1. Product introduction The equipment is composed of two parts: the fixed bench of the electronically controlled gasoline engine assembly and the running accessories and the operation detection control panel bench. The engine can carry out practical operation under normal working conditions such as starting, acceleration, and deceleration, and truly display the composition and working process of electronically controlled gasoline engines. It is suitable for the teaching needs of secondary and higher vocational and technical colleges, general education colleges and training institutions for automobile engine and maintenance training. Two. Functional features 1. The real operable electronically controlled gasoline engine fully demonstrates the composition and working process of the electronically controlled gasoline engine, and the engine can carry out practical operation under normal working conditions such as starting, acceleration, and deceleration. 2. The training bench is composed of two parts: the fixed bench of the engine assembly and the running accessories and the operation detection control panel bench. 3. The panel of the training bench is painted with a color UV flat panel printing circuit diagram, and students can intuitively compare the circuit diagram and the engine object to understand and analyze the working principle of the control system; The panel adopts 4mm thick high-grade aluminum-plastic panel with corrosion resistance, impact resistance, pollution resistance, fire prevention and moisture resistance, and the surface is treated by special process spraying primer; The panel is printed with a color system circuit diagram that never fades. 4. The panel of the training bench is equipped with a detection terminal, which can directly detect the electrical signals of each sensor, actuator and engine control unit pin, such as resistance, voltage, current, frequency signal, etc. on the panel. 5. The base in front of the equipment testing panel is equipped with a 20cm steel table, which is convenient for placing data, testing instruments, etc. 6. The training bench panel is equipped with automobile instruments, fuel pressure gauges, vacuum pressure gauges, which can display real-time changes in engine speed and other parameters; 7. The training platform is equipped with a diagnostic seat, which can be connected to a special or general automotive decoder to read fault codes, clear fault codes, read data streams and other self-diagnosis functions of the engine electronic control system. 8. The training platform is equipped with a power main switch and protective protection device. 9. The base of the training platform adopts steel structure welding, front / both sides are welded round handguards, the surface is treated by spraying process, with self-locking caster device, flexible movement, safe and reliable, strong and durable.

Hebei Suna Technology Co., Ltd. was founded in 2002，Our main products includes HPMC, HEMC, RDP, HEC, PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products. My email is: info@cnsuna.com My Whatsapp is +86 18631109636