Import-Export Bulletin Board  

Home > Offers to Sell > Chemicals & Plastics > Other Chemicals > Other Chemicals

Contact: Mr. Eric Min
Company: Yixing bluwat chemicals co.,ltd
No.16 Yongning Rd., Yixing Chemical Industrial Park, Yixing City, Jiangsu P.R., China, 214213
Yixing 214213
China
Phone: 86-510-87821568
Fax: 86-510-87821558
E-Mail: Send Inquiry Member for over 1 year
Date/Time:  2/14/23 6:51 GMT
 

Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644

Summary

BLUWAT F7 is a highly active liquid inorganic coagulant that offers higher
effective clarification in municipal and manufacturing wastewater treatment,
water purification chemicals
BLUWAT F7 is a Nanotechnology coagulant and has a great deal of advantages for
the biological treatment procedure.
BLUWAT F7 can get a better flocs structure and enhance the sedimentation of
flocs significantly, then improve MLSS and bacterial concentration throughout
the biological process, so treatment performance will be enhanced considerably.
It is used in the treatment of commercial and municipal wastewater treatment.

Benefits
Better coagulation and sedimentation of flocs
Much better SVI outcome
Reduction turbidity of processed water of 2nd sedimentation tank
Promoting the development and reproduction of bacteria in the aeration tank.
Better reduction of COD, BOD, TSS, TN, and TP by 30-60%.
Avoid Scam and Bulking issues.
Cutback of sludge by 30-40%.
Much better sludge dewatering effectiveness.
Lower treatment cost.

Jar Test Procedure
1. Have the water samples from the equalization tank and 2 beakers.

2. Compare to conventional coagulant (Alum, PAC, Ferric sulphate), use 1/5 -
1/4 dose, for example, the existing coagulant is PAC, the dose is 1000ppm, so
dose F7 200-250ppm in one beaker water sample.

3. Stir for 20-30 seconds, remain to inspect the sludge settling, and record
the settling time.

4. At the same time, test another beaker water sample, with an existing
coagulant (Alum, PAC or Ferric sulfate).

5. Compare the 2 beakers' sludge settling time, and measure the density.

6. Take the water after dealt with, and determine the COD, BOD, TSS, TN, TP,
and pH worth.

7. Adjust dosage, and do more tests based upon the above actions.

Specification

Specifications Data
Appearance Green to brown
Fe+2, % 7.5-8.5
Chlorides, % 0.42-2.5
Density g/cm3 20 ℃ 1.2±0.1
pH 1-3
Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 0



Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 1



Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 2
Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Report Abuse

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com