Black Cooling Tower Film Fill 1220mm Marley Cellular Drift Eliminators

* The material used for the ML cooling tower filler is PVC/PP/ CPVC. The
purpose of the filler is to increase the viscosity of the product, especially
the small filler to increase the viscosity significantly. ML cooling tower fill
before accumulation is subject to dehydration sale to avoid consuming some of
the isocyanate. It must be noted that the changeable carbon anhydride will
cause the resin to foam, which will deter the physical properties of the
polyurethane resin.



* In order to speed up the wetting speed of ML cooling tower fill and reduce
system viscosity. Still more and more fillers are increasing in the
polyurethane resin, sometimes it is necessary to add a wetting and wetting
dispersant in the resin in advance. In-mold paint is an additive with three
benefits of coating, colorant and release agent.



* The ML cooling tower filler is evenly burst into the mold, and after the
paint film is dried, the polyurethane sole, self-skin foam, and polyurethane
soft foam can be molded. necessary products. If the envoy wants to say that the
quality of the filling habits is determined, it still depends on the following
aspects:



① ML cooling tower packing has a larger specific surface area (m2/m3 packing
layer);



② ML cooling tower filler liquid has better mechanical properties of uniform
distribution on the surface of the filler;



③ The packing airflow of ML cooling tower can be evenly distributed in the
packing layer;



④ ML cooling tower packing material is not without large porosity (m3/m3
packing layer). There are other caves, and factors such as its doctrinal
strength, origin, artificiality and price should also be considered when
choosing fillers carefully.

Click to Enlarge