BASE COAT SPRAY GUN

Characteristics of Base Coat Spray Gun
The spray width of the best base coat spray gun must be wider than that of the
atomized layer. You only need to spray the base evenly on the surface to be
sprayed. The atomized layer should be smaller than the wet layer, especially after
spraying. The spraying of the base requires good fillability, and the fillability
is mainly accomplished by a wet layer.

Why need water based spray gun
A base coat is basically a paint applied to a primer layer. The base coatings do
not have any hardeners or enhancers, as they are only raw paint applied to the
primer. They don't provide any protection and usually don't stay there by
themselves; otherwise, there will be stains on the paint. When this happens,
moisture will slowly infiltrate, eventually causing the surface of the frame to
rust.

To avoid this, the base coat is used with a clear coat or a urethane base coat.
This will provide better and effective protection from paint, primer and frames
from the elements. It also gives a smooth lacquer finish because of the clear
coating. The use of base coats and clear coats is one of the most common methods
of painting, because when they are combined, they protect the surface and at the
same time look shiny. The base coat spray gun can perfectly fulfill this demand.

ZEGO is a China-based spray gun manufacturers, we provide spray gun, paint spray
gun, portable spray gun, industrial spray gun, industrial paint gun and etc. Want
to buy paint spray gun or know more? Please contact us.

Minimum Order: 100000 sets

Click to Enlarge