BALL VALVES

BALL VALVES
As one of pneumatic ball valve suppliers / pneumatic ball valve
manufacturers, MstnLand provides high performance ball valve products,
including Trunnion mounted ball valve, Floating ball valve, Welded structure
ball valve, Top entry ball valve, Wafer ball valve, Butt treaded socket welding
ball valve and Three way ball valve.

The pneumatic ball / pneumatic operated ball valve / pneumatic actuated
ball valve / pneumatic ball valves is characterized by low flow resistance,
reliable sealing, fast opening and closing and long service life, has been
widely used for various critical engineering and manufacturing applications. A
ball valve should be installed horizontally in the pipeline to cut off,
distribution and change the flow direction of the medium, it just only needs to
rotate 90 degrees of operation and small torque can be closed tightly.

Types of Ball Valves Based on Material

When buying ball valve, it is significant to compare the different materials
that are used to manufacture ball valves. The selection of the material used in
the ball valve depends largely on the service condition of the valve. Body
materials of MstnLand ball valves include, but are not limited to stainless
steel, wcb, carbon steel, forged and cryogenic.

Types of Ball Valves Based on Structure

Driven by the stem, the ball valve revolves around its axis. According to the
structural form, ball valve can be divided into Floating ball valves, trunnion
mounted ball valve, top entry ball valve, metal seated ball valve, full weld
ball valve and industrial ball valve.

BALL VALVES
MstnLand provides high performance ball valve products, including Trunnion
mounted ball valve, Floating ball valve, Welded structure ball valve, Top entry
ball valve, Wafer ball valve, Butt treaded socket welding ball valve and Three
way ball valve.

The ball valve is characterized by low flow resistance, reliable sealing, fast
opening and closing and long service life, has been widely used for various
critical engineering and manufacturing applications. A ball valve should be
installed horizontally in the pipeline to cut off, distribution and change the
flow direction of the medium, it just only needs to rotate 90 degrees of
operation and small torque can be closed tightly.

Types of Different Valves Based on Material

When buying ball valve, it is significant to compare the different materials
that are used to manufacture ball valves. The selection of the material used in
the ball valve depends largely on the service condition of the valve. Body
materials of MstnLand ball valves include, but are not limited to stainless
steel, wcb, carbon steel, forged and cryogenic.

Cast Iron Ball ValvesCast Iron Ball Valves
Cast Iron Ball Valves
Cast Steel Ball ValvesCast Steel Ball Valves
Cast Steel Ball Valves
Stainless Steel Ball ValvesStainless Steel Ball Valves
Stainless Steel Ball Valves
Stainless steel ball valve can be closed tightly with only a 90-degree rotation
and a small torque. The completely equal valve body cavity provides a low
resistance, straight-through flow path for the...

Brass Ball ValvesBrass Ball Valves
Brass Ball Valves
Fully Welded Ball ValvesFully Welded Ball Valves
Fully Welded Ball Valves
High Pressure Ball ValvesHigh Pressure Ball Valves
High Pressure Ball Valves
Ceramic Core Ball ValvesCeramic Core Ball Valves
Ceramic Core Ball Valves
Types of Ball Valves Based on Structure


Driven by the stem, the ball valve revolves around its axis. According to the
structural form, ball valve can be divided into Floating ball valves, trunnion
mounted ball valve, top entry ball valve, metal seated ball valve, full weld
ball valve and industrial ball valve.

What Is A Ball Valve Used For?

A ball valve is a type of valve that uses a hollow, pivoting ball to control
the flow of a medium through itself. If the hole of the ball is in line with
the flow, the valve is open, and it is closed when the valve handle has been
used to pivot the ball ninety degrees. The main function of a ball valve is to
isolate parts of a plumbed system by starting, stopping, or adjusting the flow
of a medium (usually water, air, or gas) between separate chambers, ducts, and
pipes. This is achieved by either allowing the medium to pass freely through
the ball valve, partially admitting the medium through a narrowed opening, or
blocking the flow completely. A ball valve can also be used to divert flow into
different directions, depending on the valve type and handle position. Ball
valves offer operational simplicity, a quick repair,and a high level of
versatility. This means that they are extensively used in industrial
applications and able to support pressures up to 1,000 bar (100 MPa, or 15,000
psi) and temperatures up to 400°C (752°F), depending on the material, medium,
and design used.

Ball Valve Application

Ball valves are most commonly found in plumbing systems and related
applications such as industrial cooling. Their role is generally to help manage
the flow rate of liquid or gas passing through a specific port or opening,
influencing the balance of pressure in other key parts of the system.

They are also familiar features in various types of tap, faucet, and spigot, as
well as being widely used on gas lines, domestic appliances, and additional
industrial applications. In most cases, ball valves for industrial use tend to
be more heavy-duty and robust in construction than their domestic counterparts.
They are typically found in applications where machines or systems operate
under significantly higher pressures and temperatures, within industries as
diverse as manufacturing, assembly and production, plastics and metals,
chemical, medical, industrial power, food and beverages, printing and textiles,
electronics, automotive, and logistics.

What is the Difference between Ball Valve and Globe Valve?

The main difference between theglobe valve and the ball valve is the way they
open and close the flow. A globe valve is used to control and throttle the flow
while with a ball valve you can’t control the flow and the only thing you can
do with the flow is to close it. With a globe valve you are able to regulate
the flow whereas the ball valves are well-performed for closing the flow
without any pressure drops.

Another difference is that a ball valve has a stem and a ball that rotates
horizontally but a globe valve has a stem and a plug that moves vertically. If
you need to keep the flow closed for a long period of time, use a ball valve. A
ball valve works more efficiently in high-pressure systems like fire hoses. If
the regulation of flow is the matter, it’s better to use a globe valve.
Cooling systems, fuel and steam systems are some applications of globe valves
of which the flow needs to be under strict control. Unlike globe valves, there
is no restrictions of installation for ball valves. Besides, ball valves are
lightweight in comparison with globe valves. Other differences are that ball
valves are more durable, work well after so many cycles and are more reliable
even after a very long term of misusing.Ball valves possess a small obstruction
of their fluid and they are less noisy while the globe valves share a large
obstruction of their fluid and may become a little bit noisy after being used
for many years.

If you want to know more about pneumatic ball valve price, please contact us.

If you wan to buy waste water valve, please leave us a message.

Minimum Order: 1 pieces

Click to Enlarge