Automatic X-ray Inspection Machine

Automatic X-ray Inspection Machine
The X Ray Inspection Machine has a set of X-ray imaging system, four-axis robot
automatic loading and unloading, online automatic detection of discrete
components in the semiconductor industry, and can adapt to 7-inch, 11-inch, and
13-inch trays.
Usage
The Automatic X-ray Inspection Machine has a set of X-ray imaging system, four-
axis robot automatic loading and unloading, online automatic detection of
discrete components in the semiconductor industry, and can adapt to 7-inch, 11-
inch, and 13-inch trays. The X Ray Inspection Machine emits X-rays through the
X-ray generator, penetrates the inside of the chip, and receives the X-rays
from the flat panel detector for imaging. The image is analyzed and judged
through image algorithms to determine good and defective products, and through
the re-disc function, it is determined that the chip is in place. The serial
number in the tray, so that the back end can pick out the bad chips.
 
Automatic X-ray Inspection Machine Characteristics
1. The self-developed replay algorithm can replay in real time, and replay
while taking pictures.
2. Rich man-machine interaction functions. The interface picture can be
dragged, zoomed, and you can double-click the NG chip on the replay chart to
index and display the original picture, NG type and other information of the
chip.
3. The self-developed detection algorithm can automatically and accurately
detect defective items such as the line type of the chip and the chip guide.
4. The software has functions such as scanning code, MES uploading, and manual
re-judgment.
5. High detection efficiency: the entire disk matrix type drawing, no need to
pull the material coil; with CCD vision positioning system, the robot
automatically feeds the material. It takes 3min (3000pcs) to inspect the 7-inch
tray.
6. Production line docking: with the function of docking with AGV.
7. Safety and environmental protection: The entire equipment is interlocked
safely, with triple protection functions, and any part of the surface of the
fuselage meets the safety radiation.
 
Automatic X-ray Inspection Machine Technical Parameter
Total size 2010*1850*2300 Total weight 3000kg
Packing size 2150*2000*2400 Packing weight 3500kg
Machine power 5.5kw Machine efficiency 3.5mins/plate
Light tube Closure Maximum voltage 130KV
Detector HD FPD Imaging mode 2.0D
Measuring size 7-13 inches material Measuring Type discrete component

Automatic X-ray Inspection Machine Advantages:
(1)Automatic detection
Automatic detection alignment of negative and positive of battery, and
statistics the maximum/minimum values at the same time.

(2)Automatic judgment
Automatic make a judgement of NG/OK products according to the setting standard.

(3)Convenient and quickly
The machine is with accurately position, quick and convenient to user.

(4) Safety protection
Doors are equipped with photoelectric sensor. The machine will immediately stop
and get into a protection model if any door is open.
 
Automatic X-ray Inspection Machine Applications:
Lithium battery, SMT, LED, Electronic products, casting products and so on.
 
How does Automatic X-ray Inspection Machine Work?
Automatic X-ray Inspection Machine uses the penetrating effect of X-ray rays.
When X-rays penetrate the objects/material, those objects/materials will absorb
part of the X-rays and the rest X-rays will be received by the detector.
Different-density objects/materials have different absorbability, which means
the detector receives different X-rays after penetrating. It will show the
image on display after the detector converts that X-ray into visible light. If
you want to know more about the X Ray Inspection Machine, please contact
Zhengye now.