Aluminium Oxide Paint Striper Disc With Shank (AO)

Aluminum oxide is a popular choice among industrial professionals because of
its fast cut-rate and long life. This mineral makes a tough, durable abrasive
that self-fractures to expose fresh cutting edges, whereas traditional natural
abrasives dull more quickly. Due to its fast cut rate, hardness, and strength,
it is widely used in grinding applications in addition to sanding and finishing
applications.

Aluminium Oxide Paint Stripping Disc for Angle Grinder with Shank (AO) Grit
Size Table Corresponding To Raw Materials

Aluminium Oxide Paint Striper Disc with Shank (AO) Paint Striper Disc with
Shank Size Table

Aluminium Oxide Paint Striper Disc with Shank (AO) Specification:
Max. RPM: 7000~10000 RPM

Outer Diameter: 100mm/115mm/125mm/150mm/180mm

Center Hole Diameter: 16mm/22mm

Other Raw Materials: Silicon Carbide (SC)


Aluminium Oxide Paint Striper Disc with Shank (AO) Materials that can be
worked:
Aluminium

Cobalt-based alloys

Other non-ferrous metals

High-temperature-resistant materials

Nickel-based alloys (e. g. Inconel and Hastelloy)

Bronze

Hard non-ferrous metal

Titanium

Titanium alloys

Copper

Soft non-ferrous metal

Brass

Zinc

Stainless steel (INOX)

Grey/nodular cast iron (GG/GJL, GGG/GJS)

Annealed cast iron

Thermoplastics

Elastomers

Fibre-reinforced duroplastics (GRP, CRP)

Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

Steel, cast steel

Aluminium Oxide Paint Striper Disc with Shank (AO) Applicable Industries
Applications
Surface work

Roughening

Cleaning

Alum , inium Oxide Paint Striper Disc with Shank (AO) Applicable Industries
Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO)
Instructions:
Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO)

Please try to choose an operation indoor environment and wear protective guards
and goggles.

Never exceed the recommended maximum permitted rotational speed for safety
reasons.

In order to have a good stock removal rate, quality of surface, and thermal
loading on the workpiece, the best performance would be with a recommended
cutting speed of 15-20m/s.

Don't push and increase the pressure during the processing to achieve a finner
surface looking, but try to switch to different grit flap wheels.

Safety Warning:
The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to
consult your sales to check the safety rotating speed before use.

Keying abrasives is a family-owned company established in 1997, the business is
expending to more than 15 countries, focus on abrasive tools, custom abrasives
materials and service grinding and polishing industrials.

If you want to know more kinds of spindle flap wheel, please visit our website.

Click to Enlarge