AAK hydraulic relief valve with dust-free packaging and no jamming

Mateo comes from a Canadian company specializing in food hydraulic equipment.
The hydraulic relief valves he needs are not to be used in traditional
machinery or equipment. He pays special attention to the cleanliness of the
hydraulic relief valves. Last week, he sent an email saying that he would order
2,000 hydraulic relief valves at one time, because the customer placed a large
order for the equipment newly developed by his company at the end of last year,
and his boss repeatedly stressed that he must purchase from AAK only.

Mateo gave AAK a trial order of 20 hydraulic relief valves in the second half
of last year, and specifically noted that the parameters of this hydraulic
relief valve should not be careless, because it is related to the sales of
their new equipment. At the same time, pay attention to the cleanliness of the
hydraulic relief valves, because this equipment is used in the food assembly
line. I replied to him at that time that you can rest assured of the quality of
AAK hydraulic relief valves. You can compare with several manufacturers at the
same time, and let the results to speak. Several months after the samples of
hydraulic relief valves were sent, Mateo didn't reply. During this period, we
also sent several emails to follow up, but no any news, it's like a stone
sinking into the sea. At that time, I thought he found a better manufacturer
than AAK hydraulic relief valves. I didn't expect that 6 months later, Mateo
immediately placed the big order of the hydraulic relief valves, which really
surprised me.

I asked Mateo why your boss decided to place such a big order for AAK hydraulic
relief valves. Mateo said that during sample stage for the hydraulic relief
valves, they selected 6 manufacturers and started installation and
commissioning after receiving the samples. Except for one hydraulic relief
valve manufacturer, the parameters of the other 5 manufacturers were qualified.
They decided to choose a hydraulic relief valve with the lowest price to test
the machine. The hydraulic relief valves stuck in 3 months, affecting the
operation of the equipment. After disassembling the valve body, the engineer
found that there was fine sand like dirt on it, which should be caused by dust
pollution on the hydraulic relief valves. The manufacturer believes that the
dust pollution on the hydraulic relief valves is caused during transportation,
which has nothing to do with them. The engineer suggested using AAK hydraulic
relief valves to test the machine instead.

In more than half a year of debugging, there was no stuck problem. The boss
said that although the price of AAK hydraulic relief valves was a little higher
than that of other factories, the details of their dust-free packaging were
amazing. Compared among 6 hydraulic relief valve manufacturers, only the
packaging of AAK surprised everyone.

When we know the equipment is to be used in the food production line, we know
that the cleanliness of the hydraulic relief valve is strict. We did these
things:

1. The components of hydraulic relief valves are cleaned with ultrasonic
cleaning equipment after processing;
2. In the assembly workshop, automatic induction setting is adopted for the
entrance and exit, and workers are not allowed to go in and out unless
necessary, so as to avoid dust pollution of the packaging site.
3. After the hydraulic relief valves pass the quality inspection, put each one
into a single layer thickness of 0.12mm polybag and seal it.
4. Put it into the injection molded PP plastic box, and then in inner packaging
and outer packaging. 100% dust free protection during transportation.

AAK hydraulic relief valves, dust-free packaged, used in food equipment,
welcome to have a small try!

https://www.aakindustry.com/info-detai , l/hydraulic-relief-valves-aak182

Click to Enlarge