AAK Hydraulic Pressure Control Valve High Pressure Resistance & Durability

Caspar is from Samhydraulik S.p.A. in Italy, mainly responsible for the
purchasing of hydraulic valves. In March this year, Caspar requested AAK to
sample 10 hydraulic pressure control valves by soonest. This sample order was
quoted half a year ago. There must be a reason for him to be so anxious to
place an order now. After several rounds of communication, it was learned that
Caspar was cheated by the original hydraulic pressure control valve
manufacturer.

In the second half of last year, their company developed a new hydraulic power
unit, which requires a high-pressure hydraulic pressure control valve, and the
durability should reach more than 2 million times. Caspar contacted more than
10 hydraulic pressure control valve manufacturers. Most of them are able to
produce the hydraulic pressure control valves with high pressure resistance and
durability of more than 2 million times. Only AAK hydraulic valve and other 2
manufacturers have quoted prices. After receiving our quotation, Caspar said
that the price of AAK hydraulic pressure control valve was about 20% higher
than that of other manufacturers, and then there was no further news. Until
today, 6 months later, he was anxious to ask AAK to make samples immediately.

6 months ago, Caspar selected another hydraulic pressure control valve
manufacturer to make samples. 5 weeks later, their new hydraulic power unit was
successfully tested and the equipment was expected to be popular. Caspar asked
the original hydraulic pressure control valve manufacturer to hurry up to
prepare materials, but the manufacturer wanted to raise the price by 40%.
Because the valve spool material was hard, the cutting tools needed to be
changed constantly, the production cost was increased, and the defective rate
was also high. If without a price increase, the manufacturer refuses to produce
the order. Caspar felt very helpless.

The boss was very dissatisfied with such a hydraulic pressure control valve
manufacturer who raised the price at the last moment, and asked Caspar to find
a new manufacturer. Caspar suggested that AAK can make samples. If the original
price of AAK hydraulic pressure control valve can be maintained, 20% of the
cost will be saved. 1 month later, AAK sent 10 samples of hydraulic valve
pressure control valves. 1 week later, Caspar informed that the test was passed
and 1,000 samples need to be produced immediately. Caspar also wants to know
why AAK hydraulic valve pressure control valve can maintain its original price
in the same 6 months, while the other manufacturer needs to increase it by 40%.

Most manufacturers of hydraulic pressure control valves do not pay attention to
some details in the processing at the drawing stage, and only know after
suffering in the sampling process. This hydraulic pressure control valve has
high requirements, especially the reaming of valve spool hole is the key to the
finished product. AAK does not need to constantly change the tools, because the
ingenious use of cutting fluid in the cutting process can reduce the friction
between the tool and the workpiece surface, reduce the chip, and reduce the
cutting force and cutting temperature. This is a unique skill. AAK engineers
with more than 20 years of production experience strictly control the process,
and select the best Castrol cutting fluid in the world. With its high
permeability and high adsorption efficiency, combined with the control of our
engineers, not only the cost is saved, but also the tool wear is effectively
reduced, and the surface quality of the workpiece is also high.

AAK hydraulic pressure control valve is high-pressure resistant and durable for
more than 2 million times. You can also have a small try!

https://www.aakindustry.com/info-detai , l/hydraulic-pressure-control-valve-aak251

Click to Enlarge