AAK Hydraulic Flow Control Cartridge Valve High Precision

For a hydraulic cartridge flow control valve, with many internal oil passage
holes in different apertures and 60 ° seating holes, and the accuracy
requirement below 0.8μm, Hemendra asked the most trusted local cartridge valve
manufacturer to make samples. 3 weeks later, the manufacturer found that the
scrap rate of the hydraulic flow control cartridge valve was more than 60%, and
the efficiency was low, so he gave up. The other hydraulic cartridge flow
control vale manufacturers had little interest in making samples. After AAK
took over, it adopted a five-stage forming reamer from Germany, and the cutter
has several blades with different diameters. This tool, solves the processing
of all oil passage holes, and the hole accuracy is within 0.5μm, 40% higher
than the original requirement. AAK hydraulic cartridge flow control valve
enables Hemendra to receive the order for hydraulic cylinders successfully.

Hemendra is from India, and has purchased hydraulic cartridge valves from AAK
for 5 years. Some time ago, one of their hydraulic cylinders needed a
customized hydraulic cartridge flow control valve, but encountered
difficulties. He contacted me. After communication, I learned the difficulties
he encountered in local hydraulic cartridge valve manufacturers. Because of the
wasted time in the early stage, he needs AAK to send the hydraulic cartridge
flow control valve sample within 40 days. According to his drawing, it is
difficult to process the valve hole, but AAK has experience in this aspect.
After 35 days, AAK sent 20 samples of hydraulic cartridge control valves.

During CNY, Hemendra told me that the customer was satisfied with their
hydraulic cylinder prototype and would like to place the annual order. He asked
me to give priority to his orders for the hydraulic cartridge flow control
valves. Hemendra also specially thanked me. The sample of AAK hydraulic flow
control cartridge valve is not only delivered fast, but also stable in
manufacturing quality, especially the valve hole accuracy reaches 0.5μm, which
is 40% higher than the original requirement.

AAK hydraulic flow control cartridge valve, in the finishing process, uses
five-stage forming reamer, which is from Germany, and has multiple blades with
different diameters. A tool, solves the processing of all oil passage holes,
and the hole accuracy is within 0.5 μm, which is 40% higher than the original
requirement. The reamer has a plurality of cutter teeth, and the reamer body is
provided with a cutter bar, a cutter handle and a cutter. The reamer body is
connected with the machine tool through the tool handle. The five-stage forming
reamer can easily shape the 60-degree seat face. It is tapered and can be
positioned. Especially, the tool has multiple blades with different diameters.
Under the operation of our skilled workers for more than 30 years, the
processing efficiency is high and the accuracy is guaranteed.

AAK hydraulic flow control cartridge valve, is processed with good tool, by
good craftsman, with high precision, you can also try it.

https://www.aakindustry.com/info-detail , /flow-control-cartridge-valves-aak487

Click to Enlarge