8p8c Ethernet Keystone Jack RJ45 UTP 90 Degree Tooless

RJ45 UTP Cat5e 8P8C 90 Degree Toolless Keystone Jack TM-8029

Application:
Communication outlet.
Multi-user communication outlet.
Concentration point.
Jack-style patch panel.
Easily into most Wall Plates, Surface Mount Boxes and Blank Patch Panels.
Material Specifications Plastic:PC
Pin:Phosphor bronze QSn6.5-0.1Y/δ0.4,Gold plating thickness≥6μin(or
Customized according to customer requirements)
PCB:Glass fiber copper clad plate,UL94V-0,FR-4
Snap ring:Phosphor bronzeQSn6.5-0.1 T
Crimping cover:PC
Shield cover,screening can(Zinc alloy plating)(For shielding products)
Mechanical Properties Insertion force:Insert with standard RJ45 plug(The lock
lever works),Insertion force≤20N
Pull out force:After the standard RJ45 plug is inserted,pull out in the
horizontal direction(The lock lever does not work),

Pull out force≤20N

Pull test:The computer plug is inserted into the socket and in the locked
position. After the network cable is connected to the keystone jack, test the
pulling force of the entire system: the system should be able to withstand a
pulling force of 68N, 60±5S does not come out, pay attention to the applied
rate shall not be greater than 44.5N/S
Suitable wire diameter: 0.35-0.60mm
Electrical Properties Contact resistance:Under normal conditions, the contact
resistance of the contact blade between the gold pin and the standard network
plug (commonly known as RJ45 plug) of the brand new unused socket is ≤20mΩ.
Insulation resistance: Under normal conditions, the insulation resistance
between adjacent gold pins is ≥500MΩ (DC100V)
Withstand voltage: Under normal conditions, apply DC1000V (AC700V) between
adjacent gold pins for 1 minute, and there should be no breakdown or flying fox
phenomenon
Transmission Property Link test:Near-end crosstalk(NEXT), attenuation
crosstalk ratio(ACR) and return loss(RL) meet the test requirements of the
corresponding level of 90m link test.
Reliability Mechanical life of plug and pull:Under normal conditions, the
standard RJ45 plug is inserted/pulled out for 750 times at a speed of 10-15
times/min (the elastic lock rod of the plug does not move), and the product is
normally on (does not fail) with contact resistance ≤40mΩ
Mechanical life of wiring:With the wire punch down tool, press the standard
CAT5E or other corresponding class cable into/out of the insert spring (IDC
terminal) for 80 times, and it can still conduct normally.
Environmental Performance After 24 hours of neutral salt spray test, the
metal electroplated parts on the product have no visible rust oxidation

Click to Enlarge