60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn

Philippine 60FT Q345 4.5mm thickness Steel Power Transmission Pole with bitumn





Descripition of material:
1. Poles are made by the high-quality metal plants,which were molded into the
multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion
treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel

60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 0









Specification:



Suit for Electricity distribution
Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400,
SS490, to ST52-
Torlance of the dimenstion +- 2%
Power 10 KV ~550 KV
Safety Factor Safety factor for conducting wine : 8
Safety factor for grounding wine : 8
Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole
Marks Nane palte through rivert or glue ,engrave ,emboss as per customer
requirement
Surface treatment Hot dip galvanized Following ASTM A 123,
color polyester power or any other standard by client required
Joint of Poles Insert mode,innerflange mode,face to face joint mode
Design of pole Against earthquake of 8 grade
Wind Speed 160 Km/Hour . 30 m /s
Minimum yield strength 355 mpa
Minimum ultimate tensile strength 490 mpa
Max ultimate tensile strength 620 mpa
Standard ISO 9001
Length of per section Within 14m once forming without slip joint
Welding We has past flaw testing.Internal and external double welding makes
the welding beautiful in shape
Welding Standard :AWS ( American Welding Society ) D 1.1
Thickness 1 mm to 30 mm
Production Process Rew material test → Cuttingj →Molding or bending →
Welidng (longitudinal )→Dimension verify →Flange welding
→Hole drilling →Calibration → Deburr→Galvanization or
powder coating ,painting →Recalibration →Thread →Packages
Packages Our poles as normal cover by Mat or straw bale at the top and
bottom ,
anyway also can following by client required , each 40HC or OT can
loading how many pcs will calculation base on the client actually
specification and data


60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 1





Production Process
Raw material test → Cutting →bending →Welding (longitudinal )→Dimension
verify →Flange welding →Hole drilling →sample assemble → surface clean→
Galvanization or powder coating ,painting →Recalibration →Packages







Quality Control
We strictly follow the standard of ISO9001-2008. Quality is in the first place
at every stage of production to ensure the product compliance to the
specification/standards. Careful inspections are carried out by highly trained
inspection engineers during every procedure from raw material stage to finished
product and delivery.

60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 2

Click to Enlarge