480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch Scr

Product Description

4.3 inch Capacitive Touch 480*270 TN ESP32-S3 HMI Arduino LVGL WIFI&Bluetooth
Smart Display Screen RGB LCD TFT Module

ESP32 development board-8M PSRAM 16M Flash, standard 4.3-inch TFT screen and
Without touch or Resistor touch or Capacitive touch , support one-key automatic
download, provide LVGL demo and arduino examples

ESP32-S3-WROOM-1

CPU and OnChip Memory
• ESP32-S3 series of SoCs embedded, Xtensa ®
dual-core 32-bit LX7 microprocessor, up to 240
MHz
• 384 KB ROM
• 512 KB SRAM
• 16 KB SRAM in RTC
• Up to 8 MB PSRAM
WiFi
• 802.11 b/g/n
• Bit rate: 802.11n up to 150 Mbps
• A-MPDU and A-MSDU aggregation
• 0.4 µs guard interval support
• Center frequency range of operating channel:
2412 ~ 2484 MHz
Bluetooth
• Bluetooth LE: Bluetooth 5, Bluetooth mesh
• Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
• Advertising extensions
• Multiple advertisement sets
• Channel selection algorithm #2
• Internal co-existence mechanism between Wi-Fi
and Bluetooth to share the same antenna

model:ESP32-4827S043C

Size:4.3 inch

Resolution:480*272

Touch mode:Resistive touch

Viewing angle:TN

Interface mode:16bit RGB

Operating temperature:-20°-70°

Weight:160g

E , xternal dimensions:123.0*74.0mm

Display size:95.04*53.86mm

Operating voltage:5V

Backlight parameters:6 in parallel and 2 in series

Pin definition:type-c

Introduction

The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif
products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and
Bluetooth/BLE 4.2 technology inside.

ESP32-S3-wroom-1 has a significant performance improvement. It is equipped with
a high-performance dual-core Tensilica LX7 MCU. One core handles high speed
connection and the other for standalone application development. The dual-core
MCU has a 240 MHz frequency and a computing power of 600 DMIPS.

In addition, it supports Wi-Fi HT40, Classic Bluetooth/BLE 4.2, and more GPIO
resources.

Product description

This LCD module uses ESP32-S3-WROOM-1 module as the main control, the main
control is a dual-core MCU, integrated WI-FI and Bluetooth functions, the main
frequency can reach 240MHz, 512KB SRAM, 384KB ROM, 8M PSRAM,Flash size is 16MB,
The display resolution is 480*272 or 800*480, resistive touch or Capacitive
touch. The module includes LCD display screen, backlight control circuit, touch
screen control circuit . Reserve the TF card interface ,IO port interface, this
module supports development in arduino IDE, ESP IDE, Micropython and Mixly.

Features

●4.3-inch color screen, support 16 BIT RGB 65K color display, display rich
colors·

●480X272 resolution

●The sample program has been programmed in the factory and can be plugged in

●With TF card slot for easy expansion storage

●Provide arduino library functions and sample programs to facilitate rapid
secondary development

●Support one-click download program·

●Military-grade process standards, long-term stable work·

480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch Screen
RGB 0
480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch Screen
RGB 1480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch
Screen RGB 2
480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch Screen
RGB 3
480*270 ESP32 Display Module HMI Arduino LVGL 4.3 Inch Capacitive Touch Screen
RGB 4

Click to Enlarge