3 Rolls Plate Bending Machine

The CNC 3 roll bending machine adopts the structure of the lower cylinder. The
upper working roller of this three roller bending machine is the main driving
roller: the upper roller is driven by a hydraulic motor (a motor) through a
planetary reducer to drive the upper roller to rotate, and the two lower
rollers are respectively driven by a hydraulic motor planetary reducer to drive
the lower roller to rotate. The lifting of the upper roller is realized by
hydraulic cylinder, the lifting displacement is controlled by computer,
automatic leveling, screen display, synchronization accuracy ±0.2mm; the
horizontal position of the two lower rollers can be adjusted separately, the
horizontal movement adopts hydraulic transmission, the center distance can be
adjusted; the side lower roller bearing seat is equipped with a cone stopper to
slow down the small end of the sector plate to achieve a certain range of cone
rolling; the general cone angle is 30°, 50% of the full load. EZHONG 3 roller
bending machine price is very reasonable, contact us to know about it.

The tail of the upper roller is equipped with a balance mechanism, which can
facilitate the unloading of the rolled workpiece and the cylinder. The three
roller pipe bending machine is equipped with a fixed console and a remote
control button box, which are convenient for workers to use. This 3 roller pipe
bending machine is equipped with a safety interlocking device to make the
operation safer. The 3 roll bender has simple operation, convenient maintenance
and high rolling precision. It is an advanced and practical large-scale CNC
plate bending machine. As one of the professional 3 roller bending machine
manufacturers, EZHONG has an advanced and practical large-scale 3 roller
bending machine for sale at competitive prices.

Working Principle Of Three Roll Bending Machine

The controlled movement of the lower roller makes the pre-bending operation
very easy.

The reduction of the distance between the lower rollers can better drag the
plate, which facilitates the subsequent bending of products with smaller
diameters and thicknesses, and facilitates the measurement of curved plates
that must be welded.

Increasing the distance between the lower rollers makes it easier to bend thick
plates.

During pre-bending, the steel plate is kept in a horizontal position, which
ensures better safety conditions for the operator.

Due to the upper profiled roller operating system, the three roll bending
machine can be used as a traditional press to perform pressing and measure the
finished product.

In the same way, very thick cone plates and curved plates can also be produced
through different pressing operations.
Advantage Of EZHONG Three Roll Bending Machine

High-precision end of the pre-bending, set the length of the straight edge
freely; direct pressure on the pre-roll bending, high-precision can be
completed in advance of the end of the bend.

CNC control, high productivity products rolling process parameters NC, a simple
and substantial increase inefficiency.

The roller of metal fabrication equipment assumes the bulging form on products
accuracy hyper group, have asking a roller to coordinate adjustment, continuous
bending on time of roller lower part, this one broad range inner is able to
make ideal products roll from lamina to plank.

The 3 roller pipe bending machine is operated under the security of two fixed
roll, roll up and down on, move around, do not work with mobile work roll,
operations safely.

We also have types of roll forming machine second hand for sale, if you have
needs, please contact us.

Minimum Order: 1 sets

Click to Enlarge