220V 50HZ AC Recovery Machine AC Flush 8HP With 10kg Refrigerant

AC Flush Automotive Refrigerant Recovery Machine , Air Conditioner Cleaning
Machines For Auto Work Shop





Why need to flushing and cleaning AC system ?



Once an AC system has been contaminated or has suffered a failure , the most
important part of the AC service to restore the cooling performance to the
system = FLUSHING . WITHOUT proper flushing procedures , seizing a new or
rebuilt compressor is a real possibility . The AC compressor must be lubricated
at all times . The AC compressor is the only moving part in the entire system
and the only reason for oil in the system . The oil is being circulated
throughout the system , that means that all the components ( condenser , hoses
, tubes , evaporator , drier , accumulator ) have some coating of oil
internally . If any dirt , debris or contamination happened in the system all
components are affected . Removing the oil ( and oil film inside the components
) will eliminate all of the contamination from the AC system . It’s the oil
that attracts and holds contaminants within the system . Remove the old oil =
remove the contamination . The AC system must be flushed whenever the AC
compressor is being replaced/removed or whenever there is indication of
contamination within the system . Make it a habit to remove and inspect the
orifice tube ( if the system is so equipped ) . The orifice tube inlet filter
screen will always tell a story about the condition of the auto AC system . Any
debris or foreign material found on the orifice tube should cause you to look
for other indications of contamination .

Click to Enlarge